Tanda AQUATOP, Installation Manual, Page: 75 / 239

MAN-AT-D Manual Aquatop (2019) 1
D – Slats
The slats may only be exposed to sunlight when they are floating on the water surface
and have full contact with the water !!
All activities on the slats must be executed under a canvas,
protected from direct sun exposure !!
Condensate in slats with a transparent top layer is a fully normal phenomenon and
caused
by the diffence in temperature between the pool water and the ambient air !!
Slats with glued end caps may only be mounted and exposed to water and UV 8 days after
production. In addition, the slats should always be protected from direct sunlight if not in
contact with the swimming pool water.
During the installation of the roller shutter, be careful not to damage or detach the end
caps. It takes an average of 6 weeks for the glue to dry 100%.
1. Installation
General:
•
Respect the order of the slats in the box: on top you will find the slats for
the pool end, this is the opposite side of where the cover will be installed.
•
Avoid friction on the end caps and bending of the slats during transport of the box to
the pool, by rolling up the bundles.
•
Orientation of the slats: the curved side is the upper side of the slat; the open side is
pointed to the pool end. The slat has a male (lip) and female (open chamber) side.