Tanco 1300 Series, Operator'S Handbook Manual

Page: 52 / 112

Tanco Autowrap - 1310 / 1320
Operator’s Manual
51
Periodic Maintenace
Bearings
All ball-bearings are packed with grease, and do not need any more maintenance.
Pre-Stretchers
If the machine is in daily use, the Gears under the plastic cover on the dispenser should be greased when needed.
Cutters / Film Holders
The cutter / film holder is pre-adjusted from the factory and does not need further adjustments. When replacing spare parts, it is necessary to adjust it. The springs for the U-shaped slot
shall be adjusted so that they are almost completely squeezed together when the cutter-arm is all down.
Cleaning
The machine should be cleaned and oiled regularly and at the end of the wrapping season.
When using high pressure washing apparatus, care must be taken with the electrical installation.
Also make sure that water is not sprayed directly into the bearings, etc. Keep the control box protected from rain and water. If necessary use compressed air to dry electrical components.
Hydraulic Cylinders
Make sure that all hydraulic cylinders are closed when storing the machine.
Quick Couplers
Ensure that the quick couplers are kept clean and apply the dust caps after use.
Storage
The machine should be parked on a dry place during the closed season.
Oil Filter
The oil filter must be changed once a year.
12. MAINTENANCE