Tanco 1300 Series, Operator'S Handbook Manual

Page: 51 / 112

Tanco Autowrap - 1310 / 1320
Operator’s Manual
50
The Wrapping Arm will not Rotate
- The bolt that secures the wrapping arm during transport has to be removed so that the wrapping arm can move freely.
- Check valve 1 Screw all the way in and test. Adjust to required power.
- The safety valve, can be leaking, so that the oil is passing by the wrapping arm motor. Dismantle and try out if the sliding shaft can move freely .
- The control valve, may be blocked. Dismantle and check if the valve works normally. Do not use sharp tools.
- Check if the oil motor is working
Ask your dealer for advice BEFORE you make the problems bigger and repairing more difficult
- If the Emergency Stop has been activated. To start the machine the control box must be reset.
The Roller Will not Adjust
- Is the Solenoid valve receiving enough electric power?
When the power source is tapped by several users at ones, the voltage can fall so much that all the functions will cut out, or only the width regulating. Check the power source and mea-
sure the voltage.
- Check the Bypass Valve
If this is receiving enough power and has free flow, the problem must lie in the solenoid valve.
11. TROUBLESHOOTING