tams elektronik
LD-G-32.2 and LD-W-32.2
English
Checking the package contents
Please make sure that your package contains:
one or five locomotive decoders, depending on the version with or
without soldered connecting wires resp. with or without interface
connector;
a CD (containing the manual and further information).
N.B. For technical reasons it is possible that the PCB is not completely
inserted. This is not a fault.
Available versions
Connecting wires /
Interface
LD-G-32.2
LD-W-32.2
without wires
+
+
with wires
+
+
according to NEM 650
8- pole (NEM 652)
–
according to NEM 658
–
–
according to NEM 660
–
–
Required materials
For mounting and connecting decoders without interface you need:
an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,
a tip-cleaning sponge,
a heat-resistant mat,
a small side cutter, a wire stripper and a pair of tweezers,
electronic tin solder (0.5 mm diameter).
Page 5
