Uneven / inaccurate cut on cut media.
Adjust ruler and check if paper pusher
board is aligned (squared).
Blade will not completely retract or will
not stop cutting no matter which buttons
are pressed.
1. Check the sensor which may have be
misaligned or damaged.
2. Check the main board.
LCD screen malfunction even if Reset Key
is pressed.
Check internal connections to see if any
of the connectors have gotten loose.
Paper push out mechanism will not move. 1. Check motor.
2. Check for any signs of damage on the
main circuit board.
Alarm / error code E-1 — key/button
function is invalid and cutting operation
stops
1. Check the flash.
2. Check control panel.
Alarm / error code E-2 — machine cuts but
the blade will not retract properly.
1. Check the blade’s limit sensor.
2. Check the main board.
Alarm / error code E-4 — press shelf return
is abnormal.
1. Check limit sensor on the press shelf.
2. Check the main board.
Alarm / error code E-5 — pressing is not
normal.
1. Check pressing motor code wheel
sensor.
2. Check the main board.
Alarm / error code E-6 — machine cuts but
the paper push out mechanism will not
adjust.
1. Check the pressing motor backward
calibration sensor.
2. Check the main board.
Troubleshooting
- 15 -
Summary of Contents for Tamerica TPI-4900E
Page 1: ...Tamerica TPI 4900E 19 29 Programmable Paper Stack Cutter Instruction Manual...
Page 2: ...USER MANUAL...
Page 14: ...Parts Manual 13...
Page 15: ...14...
