Tamerica Tamerica TPI-4900E, Instruction Manual

Page: 10 / 19

In this example, we entered 8.00” on the 1st entry, 6.50” for the second, and 4.50”
for the third. Remember to press the Enter Key for 2 secs. to save all entries and
then press it again for the back gauge to adjust to the first size.
Programming in Index Mode
1. Press the Mode Key to go to the desired menu (see p. 6) then press the Data Entry
Key to highlight the area beside “S”. Enter the desired number (*0-99) then press
the Enter Key to save the entry. In this example, we entered the number 11.
*
The machine can save up to 100 memory settings,
(S 00-99).
2. Press the CLEAR key for 1-2 secs. to highlight the entry # you want to save a cut
size on (E00-E02, 3 entries total), input the number, then press Enter. This will
automatically move the cursor to the next entry #. Input the second number then
press Enter and repeat the process until you have entered all your cut sizes. After
your last entry, press the Enter Key for about 2 seconds to save all entries into the
memory bank.
Highlight the entry # by pressing the Clear Key for 1-2 secs. Enter the sizes and press the Enter Key for 2 secs.
to save all entries)
The cursor will move back to the first size after all
entries have been saved. (Back gauge has not adjusted yet.)
Press Enter again for the back gauge to adjust to
the first saved size (8.00”).
With the back gauge at 8.00”, pressing the 2 cut buttons simultaneously (p. 11) will
make the first cut at 8.00”, pressing them again will cut at 6.50”, then 4.00”, all
the way to the last size saved.
- 9 -
1
2
3
4