Z-Block Manual version 1.3
Page 10
Tamas Hydronic Systems
Applications
CLIENT:
Date
Checked:
Drawan:
Fernando
Tom
Tom
19/004/2017
19/04/2017
19/04/2017
Size
B
DWG.
No.
Scale:
Rev.
1
1
Sheet 1 of 1
Injection Pump & Hi-Low Temp. Zones
Approvals
Approved:
Proprietary Information:
The information contained in this document is the property of Thamas hydronic Systems
Inc. except as specifically authorized in writing Tamas Hydronic Systems Inc. The holder
document:
(1) Shall keep all information contained herein confidential and shall protect same in
whole or in part from disclosure and dissemination to all third parties.
(2) Shall use same for operation and maintenance purposes only.
2) Injection Pump
As an injection pump in a Tamas multiple zone application, to temper the water
temperature. You must use optional part #025-0005 180° End Connection for
creating primary/secondary piping arrangement. Injection pump controller not
supplied. See page 9 for Z-Block inverted pump configuration.
Zone Pumps
Zone Pumps
Boiler Pump
with 180° End
Connector
Mixing Pump
with 180° End
Connector
