TallyGenicom 6306, Maintenance Manual

Page: 40 / 175

6300 Series Maintenance Manual
34
2.4 Quick Fault Overrides
In addition to being able to use the above parameters to set up individual fault overrides, you may
also use three different key sequences to set up fault overrides. You may set up all fault overrides,
four specific overrides, or just Paper Out Fault override.
NOTE: To use these overrides, the printer must first be in Tech Access Mode.
2.4.1 ALL Fault Reporting
To turn all fault reporting OFF, place the printer Offline and depress the
FORM FEED
Key and
ENTER Key simultaneously until the printer alarm sounds. To turn ALL fault reporting back ON,
hold down the same two keys when the printer is Offline until the printer alarm sounds.
2.4.2 Four Faults Only
To turn fault reporting OFF for Paper Motion, Paper Out, Ribbon Fault, and platen position
sensors, hold down the
ENTER
Key and
TOF
Key simultaneously until the printer alarm sounds.
To toggle them back ON, hold down the same two keys until the printer alarm sounds.
CAUTION: When you turn on fault overrides you are losing fault protection.