TallyGenicom 2440, User Manual

Page: 40 / 150

Paper handling Operating the printer
2-28
Setting the first printing line (TOF)
You can use the TOF function for setting the vertical position of the first printing line.
To adjust the first printing line vertically, proceed as follows:
1
Either transport fanfold paper to the next top of form position or feed an inserted
single sheet by pressing the
FF/LOAD key.
2 Make sure that the printer is in offline mode; press the SEL key, if necessary.
3 Hold the SHIFT key depressed and use the Micro Feed Down or Micro Feed Up
keys to adjust the desired first printing line. Each micro feed will feed the paper down
or up in 1/180 inch (24 wire) or 1/144 inch (9 wire) increments.
4 After releasing the key, the new adjusted first printing line is saved.
The mark
A
on the transparent paper pro-
tective cover of the printhead can be help-
ful if you want to adjust the first printing
line.
A