TallyGenicom 2440 User Manual Download Page 31

Page: 31 / 150

Operating the printer

Paper handling

2-19

Print Gap Lever

The printer can handle paper with different thicknesses, including multipart forms with
up to five parts (original plus four copies). For details on paper thickness specifications,
please refer to the section

“Paper Specifications”

on page 2-17 and to Appendix A,

“Paper spec-

ifications”

on page A-4. Be sure to adjust the Print Gap lever whenever you change the

number of copies being printed.

The print gap lever has twelve settings.

Moving the Print Gap lever

to the rear

reduces the print gap, moving to the front
widens the print gap.

If printing smears, the ribbon misfeeds, or
the paper jams, move the lever one position
wider.

–

Summary of Contents for 2440























































































































































Search results

Summary of Contents for 2440

Reviews:

Related manuals for 2440

Brands by name

Popular brands

TallyGenicom 2440, User Manual

Search results

Summary of Contents for 2440

Reviews:

Related manuals for 2440

Brands by name

Popular brands