Tally DT-230, User Manual

Page: 36 / 69

Tally Dascom DT-210/230
22
 Serial Interface (RS-232C)
· DIP Switches 1
SW Function ON OFF Default
1-1 Auto Line Feed Enable Disable OFF
1-2 Handshaking XON/XOFF DTR/DSR OFF
1-3 Data Length 7bits 8bits OFF
1-4 Parity Check Yes No OFF
1-5 Parity Selection EVEN ODD OFF
1-6 Baud Rate Selection
(bps)
Refer to the following table 1
OFF
1-7 ON
1-8 OFF
· DIP Switches 2
SW Function ON OFF Default
2-1 Reserved - - OFF
2-2 Internal bell control Internal bell disable Internal bell enable OFF
2-3 Auto Cutter Disable Enable OFF
2-4 BUSY Condition Receive Buffer Full
* Offline
* Receive Buffer
Full
OFF
2-5
Print Density Refer to the following table 2
OFF
2-6 OFF
2-7 OFF
2-8 Near-End Sensor Status Disable Enable OFF
 Parallel and USB2.0 Interface
· DIP Switches 1
SW Function ON OFF Default
1-1 Auto Line Feed Enable Disable OFF
1-2
~
1-8
Reserved - - OFF