Tally DT-230, User Manual

Page: 19 / 69

Tally Dascom DT-210/230
5
1.5 Connecting the mains power

Checking the printer voltage
Make sure that the device has been set according to your country’s power supply voltage. To do this, check
the rating plate at the rear of the printer. Contact your dealer if the setting is incorrect.
Never switch on the printer if the voltage setting is incorrect; this may result in electrical
damage to the printer.
1. Make sure the printer and the computer are powered off
①
.
2. Connect the power cord to the power adapter
②
, and connect the power adapter to the power supply
interface at the rear of the printer
③
. Ensure the power cord is securely connected. Connect the power
cord plug to a mains socket on the wall
④
.

Power on and power off
1. Press the power switch to the “I” position to turn on the printer.
Upon power-on, the Power LED indicator light up.
2. Press the power switch to the “O” position to turn off the printer.
Note:
1. After switching off the printer, wait at least 5 seconds before powering on again. Otherwise, it may cause
damage to the printer.
2. Please disconnect the power cord if the printer will not be used for a long time.