Talkswitch TS-9112i, Installation Manual

Page: 21 / 29

Model TS-9112i Installation Guide 15
Other Phone Features
Other Phone Features
Adjusting the Volume
Pressing the volume button
u
adjusts the receiver, headset,
speaker, and ringer volume.
• To adjust the ringer volume, leave the handset in the cradle and press
the volume button
u
while there is no active call. There are 8
settings for the ringer — the display temporarily indicates the current
ringer volume setting.
• To adjust the handset volume, lift the handset and press the volume
button while you are on a call. The handset remains at this volume until
it is adjusted again.
• To adjust the headset volume, press the volume button while you are on
a call. The headset remains at this volume until it is adjusted again.
• To adjust the speaker volume, press the volume button while the
speaker is activated (activate the speaker by pressing
q
). The
speaker remains at this volume until it is adjusted again.
Status Lights
The Speaker Light, beside the
q
key, and the Set Indicator Light,
on the top right of your phone, provide visual indications of your
phone’s status.
Speaker Light
• Speaker light is on solid: A call is on Handsfree (speakerphone).
• Speaker light flashes slowly: The headset is being used.
• Speaker light flashes quickly: The call is muted. Press
e
to take the
call off mute.
Set Indicator Light
• Light flashes slowly: There are new voice messages.
• Light flashes quickly and the ringer sounds: There is an incoming call.
Timer
When you make or answer a call, the Timer shows the elapsed time of
the call.
Using a Headset with your Telephone
The TS-9112i accepts headsets through the modular jack on the back of
the phone. Contact your telephone equipment retailer or distributor to
purchase a compatible headset. Customers should read and observe all
safety recommendations contained in headset operating guides when
using any headset.