Talkswitch TS-9112i, Installation Manual

Page: 15 / 29

Model TS-9112i Installation Guide 9
Customizing your Phone
Customizing your Phone
An admin password may be required in some cases to access or
configure specific parameters on the phone. The default password is
22222. Once TalkSwitch has provisioned the phone, the new admin
password is 23646 (spells ADMIN).
Internal Use
When connecting your IP phone to the same LAN as TalkSwitch, first
ensure you have already configured this extension’s information and
MAC address in the TalkSwitch configuration software. Once
configured and saved to TalkSwitch, connect the phone to the LAN then
power it up. It will automatically detect TalkSwitch on the LAN and
configure itself.
External Use
When connecting your IP phone at a remote location for external use,
please perform the following steps:
1. Pre-configure the extension in the TalkSwitch configuration software
and include the MAC address of the phone.
2. Before or after deploying the phone, power up the phone and select
Options, then Network Settings.
3. Enter the administrative password for the phone set. If no password has
been previously set by your phone System Administrator, enter a
password of either ‘22222’ or ‘23646’.
4. From the Network Settings menu, select TFTP Server then Primary
TFTP . Enter the WAN (External) IP address or URL/ FQDN of your
TalkSwitch location.
5. Press Done then reboot the phone. It then connects to the TalkSwitch
system and updates its configuration.
If you encounter problems, please ensure the appropriate ports are
forwarded from the router to the TalkSwitch unit acting as the proxy at
that location; for more information, see the
TalkSwitch User Guide .
There should be no need to make any adjustments to the firewall at the
IP phone’s location.