VOIP-500 Series Quick Installation Guide
Copyright 2010 Talk-A-Phone Co. All rights reserved.
Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714-3804
Page 4 of 6
Phone 773.539.1100 • Fax 773.539.1241 • [email protected] • www.talkaphone.com
All prices and specifications are subject to change without notice.
Talk-A-Phone, Talk-A-Lert, Scream Alert and WEBS are registered trademarks of Talk-A-Phone Co.
Figure 4. Internal Jumper position for optional power modes (phone default setting is 24
VDC / 24 VAC)
V. Ground
The faceplate of the phone must be connected to earth ground. Install a #10 ring terminal to the
ground wire before connecting it to the earth grounding terminal on the rear of the faceplate as
shown in
Figure 2
.
VI. Auxiliary Input/Output
1. The
VOIP-500 Series Emergency Phone
has three (3) Auxiliary Inputs (dry contact,
10mA @ 8VDC) and three (3) Auxiliary Outputs (dry contact, 120mA @ 120VAC/DC).
The Auxiliary Output allows the peripheral equipment such as strobe lights, PTZ
cameras, door entry systems etc. to be activated when the push button is pressed.
2. Two (2) removable 6-pin connector plugs are provided for the auxiliary input and output
as shown in the
Figure 5
.
3. The Auxiliary Input and Auxiliary Output connections are as follows:
Auxiliary Connection
Connector Plug Pin Position
Aux. Input 1
Position 7 and 8
Aux. Input 2
Position 9 and 10
Aux. Input 3
Position 11 and 12
Auxiliary Connection
Connector Plug Pin Position
Aux. Output 1
Position 1 and 2
Aux. Output 2
Position 3 and 4
Aux. Output 3
Position 5 and 6
