MPEG-4 Hi-Resolution Digital Video Recorder
12
Chapter 3
System operation
*Please confirm the HDD to be installed and the proper connection before turning on the DVR*
*For the correction method, refer to Chapter 2 – Installation*
3.1
Turn on/off the recorder
3.1.1
Turn on the recorder
Plug in the power cable, switch on the power button at the back of the recorder, power indicator light
on; DVR on; default 9 windows for the video output display. If the starting time is within the
programmed recording time, the system will start recording function automatically. Corresponding
channel indicator light on and system work in a normal manner.
Note: if the system stops during HDD boot detection, the HDD many not be installed right and please
check the HDD connections (Ribbon and power connections).
3.1.2
Enter the setting menu
Press
Enter
the login screen appears on monitor before you enter the menu, you must input the
password. There are two level of password – user password and administrator password
User password
666666
Administrator password 888888
With user password, you are also not allowed to enter system setting and admin setting.
Note: For the consideration of security, please change the setting in admin setting refer Chapter4
3.1.3
Turn off the recorder *please unplug the 220VAC power supply during HDD installation*
Press the POWER key on the front panel for 3 seconds to stop the current operations. Then switch off
the power button at the back panel of the DVR to turn off the power.
3.1.4
Power off recovery
When the power is cut off abnormally, the recorder will recall its last state and continue where it left off
The state indicator light is the same as it was before the power off
3.1.5
Change the battery of the DVR
Change the battery of the DVR, recommend to the same type of Lithium fastener batteries
Note: Please check the system time in time and generally change the battery each year toe ensure the
veracity time.
3.2
Recording operation
The default recording mode after the starting of DVR is 24 hours continuous recording user can choose the
suitable recording mode due to the necessity. Instructions for the difference or ding modes as follows:
l
Schedule recording
n
Enter the menu, and set the timing period for the recording see details at Menu -> system setting
-> schedule
