MPEG-4 Hi-Resolution Digital Video Recorder
26
The third port output controllable voltage.
Delay – means to extend the recording time after receiving signal
(10,20,30,… 90Sec). when the outside alarm is disarmed, the
system will extend the recording time automatically before closing
alarm and relay output
PRE RECORD – able to pre-record (about 5sec) before the alarm
input (the pre-recording time is relevant with bit rate).
TIP –
Highlight means display the message for alarm output in the screen
17.
Motion Detection
Channel – select the relevant channel need to set motion detection
REC CHANNEL – select and display the recording channel when
alarm input (Be able to double choose). Highlight means the
certain channels will start record automatically when in motion
detection
Alarm out – choose the channel for triggering corresponding alarm
equipment when detecting the motion
DELAY – means to lengthen the recording time after receiving
alarm signal (10,20,..90sec). when the motion detection is
canceled, the system will lengthen the recording time
automatically
PRE RECORD – Able to pre-record ( about 5 sec) before the motion
is detected
TIP – Highlight means display the message for alarm output in the
screen
SENS – has three levels : Low, Mid, High
REGION – can be accessed by pressing ENTER the setting area can
be divided in 192 sections. Green section means the current cursor
position, and black section is the motion detection area the blue
area is no motion detection area press FN to locate the current
section, then move the cursor to cover the MD needed area, press
FN again to choose the MD area press
pq
to get the setting and
press enter to confirm after the default setting is selected, system
will restore the original setting
