13
3.1
Communication through Ethernet
Step 1
- Enter the
System Manager
screens by pressing the
PgDn (˅)
and
PgUp (˄)
keys simultaneously.
Step 2
- While the cursor is placed on the
General
subject use the right arrow
to
move the cursor to the right side of the screen and then use the down arrow
to move
the cursor to the
Connection
row. Hit the
Enter
key to open the options selection
window, select
Network
and hit the
Enter
key for confirmation.
Step 3
- Use the left arrow
to bring back the cursor to the left side of the screen and
use the down arrow
to place the cursor on the
Network
subject. This subject deals
with defining the
IP address
and the
Gate Way
address at which the server can locate
the controller.
Step 4
- Use the right arrow
again to move the cursor to the right side of the screen,
the cursor will rest on
IP address
. Usually selecting the
Auto
mode will do the job.
However in special cases when the
Auto
mode does not work, the
Manual
mode can
be selected and then the
IP address
and the
Gate Way
address can be manually
inserted. Usually in such cases the person in charge of the local network should be
consulted.
IP address of the
controller
Gate Way
address
