TALEX Sp. z o.o.
ul. Dworcowa 9c
77-141 Borzytuchom
tel.: +48 59 821 13 40
e-mail:
www.talex-sj.pl
16
Fig 2.
Shredder drive diagram
1 – PTO shaft,
2 – Angular transmission,
3 –Belt transmission,
4 – Working shaft.
4. Usage
Linking the machine with the tractor, setting and adjusting the height.
4.1.
The shredder is designed to work with tractors equipped with the first category three-point linkage for ECO
100, 135 and 150 shredders and equipped with the first or second category three-point linkage for ECO
180, 200, 220 shredders.
The shredder is linked with thetractor using its three-point linkage (3PT):
Lower pins (No. 1 in the drawing below) of the shredder's headstock should be placed in the holes of the
ball joints of the two lower levers of the tractor and secured,
connect the holes in the yoke with the pin (2) of the tractor's upper connector and secure it with a
cotter pin,
