www.aebikes.com.au
|
|
page 020
TALARIA STING TL3000 ERROR CODES & SOLUTIONS
ITEM
ERROR CODES
(MX VERSION)
ERROR CODES
(L1E VERSION)
DESCRIPTION
ERROR ANALYSIS
SOLUTIONS
REMARKS
1
E01
00001
Protection IC error.
The inner
communication of the
chip is disconnected.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
2
E02
00002
Battery cell
connection wire
disconnected.
The connect wire
for cells are not well
welded, cause the
welding spot loose,
fall off, or connection
wire poor contact.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
3
E03
00003
Voltage of battery
cells are not
balanced.
The difference of
battery cells is more
than 500mV, this
error code will display
on the dash.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
4
E04
00004
Battery capacity
measurement error.
Don't have this error
for STING's battery.
Just a default setting
error.
5
E05
00005
Storage error.
Record devices
detected failure.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
6
E06
00006
Time display error.
Time device
detected failure.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
7
E07
00007
Discharge MOS error.
Discharge circuit
detected failure.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
8
E08
00008
Charge MOS error.
Charge circuit
detected failure.
Re-start the bike.
If the error code is still
showing on the dash,
please send the bike to
the nearest dealer to
inspect and repair.
9
E09
00009
Over charge error.
1. Charging voltage
is higher than single
battery cell's over
charge protection
voltage 4250mV.
2. Misinformation of
BMS .
Re-start the bike.
When this error code
display on dash, will
not affect the riding, but
cannot charge. After the
re-start, if the error code
still display on dash,
please send the bike to
the nearest dealer to
inspect and repair.
