www.aebikes.com.au
|
|
page 014
REGULAR INSPECTION AND
MAINTETNANCE
• For your safety, as well as to increase the lifetime of the electric motorcycle and enjoy safe and comfortable riding,
it is strongly recommended to carry out inspections and maintenance on your electric motorcycle regularly. If your
electric motorcycle is not used for a prolonged period, regular inspections and maintenances are still required.
•
The first inspection and maintenance need to be conducted after the 300KM run-in period.
• Follow this manual and ensure full care and safety when conducting inspection and maintenance.
•
When you conduct inspection and maintenance, it is recommended to park your electric motorcycle on flat
ground.
• If the emergent inspection and maintenance is required to do during riding, pay attention to the surrounding
environment and situation and find a safe place to finish the inspection and maintenance.
• If any problems are found by inspection, please ride your electric motorcycle after solving the problems.
•
If there are any problems you are unable to find a solution to yourself, please contact the local dealer.
CAUTION.
• Both front and rear brakes are disc brakes. Once the brake pads have severe wear and tear, they should be
replaced.
• For daily use, please keep the disc brake clean. In order to ensure the silt and oil contamination does not adhere
to the disc brakes, we suggest you clean the disc brakes after every off-road ride, and regularly clean the disc
brakes after non-off-road riding.
Inspection of Operating Components
• Please inspect the front fork for any faults, such as bends, deformation, damages, loose parts, oil leaking, and so
on, before riding. Hold the handlebar to compress the front fork to see if there is any noise caused by the faults of
front fork. If there are any faults found during inspection, please contact the local dealer for maintenance.
• Inspection of the rear shock absorber.
• Inspection of the brake levers. Inspect when the free travel of brake lever is in range of 15mm to 30mm. if the free
travel is out of this range, please adjust.
• Inspect the brake performance. Ride the electric motorcycle slowly on safe ground, squeeze the front rear brake
levers to check the brakes perform properly. If there is abnormal brake performance, please check if the brake
pads need to be cleaned, replaced, or brake oil needs to be added. If there are still problems, please contact the
local dealer for solution.