www.aebikes.com.au
|
|
page 025
ITEM
ERROR CODES
(MX VERSION)
ERROR CODES
(L1E VERSION)
DESCRIPTION
ERROR ANALYSIS
SOLUTIONS
REMARKS
41
E42
00C00
Motor overheat error.
Long time peak
power riding will
cause the motor to be
overheated, or motor
inner temperature
sensor got a poor
contact, or motor inner
temperature sensor to
be broken.
1. Stop riding until the
motor's temperature
return to normal.
2. Check whether the
magnetic encoder
is loose or broken. If
it's broken, need to
replace with new one.
42
E43
00D00
Motor temperature
sensor error.
Long time peak
power riding will
cause the motor to be
overheated, or motor
inner temperature
sensor got a poor
contact, or motor inner
temperature sensor to
be broken.
1. Stop riding until the
motor's temperature
return to normal.
2. Check whether the
magnetic encoder
is loose or broken. If
it's broken, need to
replace with new one.
43
E44
00E00
Controller overheat
error.
Long time peak power
riding will cause
the controller to be
overheated
Stop riding until the
controller return to the
normal temperature.
If the solution cannot
solve the error,
please send the bike
to the nearest dealer
to inspect and repair.
44
E45
00F00
Controller
temperature sensor
error.
Long time peak
power riding will
cause the controller
to be overheated, or
controller temperature
sensor got a poor
contact, or controller
temperature sensor to
be broken.
Stop riding until the
controller return to the
normal temperature.
If the solution cannot
solve the error,
please send the bike
to the nearest dealer
to inspect and repair.
45
E46
01000
Current sensor error.
Current sensor failure.
Please send the bike
to the nearest dealer to
inspect and repair.
46
E47
02000
Motor lack of
phase error.
1. Circuit breaker
is not switched on.
2. Motor phase wires
(U/V/W) loose or
incorrect connection.
1. Switch on the circuit
breaker, and restart
the bike.
2. Turn off the bike,
and switch off the
circuit breaker. Then,
check the whether
the motor phase wire
terminal got loose,
or broken. And then,
check whether the
motor outlet phase
sequence corresponds
to the U / V / W on
the controller. Finally,
check whether
the magnetic
encoder output wire
corresponds to the
yellow, green and blue
wires on the harness
assy.
If the solution cannot
solve the error,
please send the bike
to the nearest dealer
to inspect and repair.
