Takstar XY0-1 SET, User Manual

Page: 37 / 60

① INPUT 1/2 Knob:
For adjusting the signal level of Input 1/2 respectively. Turn it counterclockwise
to decrease the input signal level and vice versa.
②
Short press to turn on/off the 48V phantom power. When on, the button
indicator lights up blue; when off, the button indicator goes off. Please turn off
the phantom power when not needed, and do not connect or disconnect any
equipment while the phantom power is on. When turning the phantom power
on or off, turn all volumes to the minimum to prevent noise or damage to the
equipment.
③ SIG LED:
For indicating whether there is signal input from MIC Connector 1/2. SIG LED
lights up green when there is signal input detected, or goes off when none
detected.
④ CLIP LED:
For indicating whether there is input signal clipping from MIC Connector 1/2.
CLIP LED lights up red when there is signal clipping detected, or goes off when
none detected.
48V Phantom Power Switch 1/2:
Master Panel
36
⑩
①
②
③
④
⑤
⑥
⑦ ⑧
⑨
PRO RECORDING/WEBCAST KIT
SET