Thank you for purchasing our "intelligent" quad photoelectric beam. This unit will provide long term dependable service when properly
installed. Please read the Instruction Manual carefully for correct and effective use.
Please note:
This sensor is designed to detect intrusion and initiate an alarm; it is not a burglary-preventing device. TAKEX is
not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by
lightning), abuse, misuse, abnormal usage, faulty installation of improper maintenance.
• Four synchronised beams
4 beams are "and-gated" which helps to prevent false alarms
from flying debris and small animals.
• High power infrared
The active infrared transmission is exceptionally strong with a
maximum arrival distance ten times greater than the specified
protection distance.
• Four frequency selections
4 separate choices of frequency avoids cross-talk in stacked or
long linear installations. Allows stacking of Transmitters or
Receivers all on one side.
• Beam transmission strength selection
2 levels of beam transmission strength, which can be set to suit
the protection distance.
• Auto-gain lock
Optimal sensitivity gain is automatically set at any coverage
distance up to the maximum protection distance. (Audible
tone indicates setting is completed.)
PHOTOELECTRIC BEAM SENSOR [INTELLIGENT]
PB-IN-50HF
OUTDOOR 165' (50m) INDOOR 330' (100m)
PB-IN-100HF OUTDOOR 330' (100m) INDOOR 660' (200m)
PB-IN-200HF OUTDOOR 660' (200m) INDOOR 1320' (400m)
INSTRUCTION
MANUAL
FEATURE
The PB-IN-HF series beams are equipped with many features, which provide a wide choice of field selectable options.
These options result in considerable flexibility for a variety of application requirements. The features are;
• Environmental module
Environmental trouble signal is sent when beam reception level is
reduced below an acceptable level.
• Programmed AGC function
Sensitivity is automatically increased in bad weather to contend
with fog, rain, or frost.
• Alarm memory indicator
Alarm memory LED located on Receiver can be manually reset
(at sensor) or remotely controlled via panel.
• Audible signal for alignment
An alignment tone aids in quick set-up of beams for electrical
measurement of alignment.
• Other features
Monitor output, Response time changeover, Tamper output.
1.
1
PARTS DESCRIPTION
Cover
Mirror
View finder
Mounting plate
Bracket
Knockout
Knockout
Pole cover
Horizontal fine
adjustment screw
Vertical
adjustment screw
Gain lock switch
(Receiver only)
Functions indications
as below
[Transmitter]
[Receiver]
Operation LED
Beam channel
(frequency 1-4)
(1ch. set at factory)
Mirror
Sensitivity attenuation LED
Beam channel (frequency 1-4)
(1ch. set at factory)
Environmental output terminal
Alarm LED
Response time adjustment
(50msec. set at factory)
Monitor jack
Adjustment dial
Tamper switch
(Receiver only)
Terminals
Functions / Indications
SOLD SEPARATELY
Shading plate
Tapping screw
(ø4x30) : 8
Oval countersunk
head screw
(ø4x20) : 8
Accessory
