background image

Symptoms

Possible cause

Remedy

Operation LED 

1. Disruption of power or inadequate power

1. Correct power source

does not light

2. Bad wiring connection or broken wire, short

2. Check and correct wiring

Receiver Alarm 

1. Disruption of power or inadequate power

1. Correct power source

LED does not

2. Bad wiring connection or broken wire, short

2. Check and correct wiring

light when the 

3. Reflection of beam is flooding receiver and 

3. Remove reflecting object. Set beam power to

beam is broken

sent into the receiver

Low. Contact TAKEX for further remedies

4. Four beams are not broken simultaneously

4. Ensure all beams are broken at same time

5. Beam interruption time is shorter than response time

5. Adjust response time

Receiver Alarm

1. Alignment is off

1. Check and adjust

LED stays on

2. Shading object between transmitter and receiver

2. Check site/remove any possible obstacles

3. Optics of units are soiled

3. Clean the optics with a soft cloth

4. Frequency channel setting on transmitter 

4. Readjust to be the same channel

does not match with that on receiver

Intermittent alarm

1. Bad wiring connection

1. Check again

2. Change of supply voltage

2. Stabilise supply voltage

3. Shading object between transmitter and receiver

3. Remove the shading object

4. The wiring of power machine is located nearby

4. Change the place for installation

transmitter and receiver

5. Stabilise

5. Unstable installation of transmitter and receiver

6. Optics of units are soiled

6. Clean the optics with soft cloth

7. Improper alignment

7. Check and re-adjust

8. Small animals may pass through the 4 beams

8. Change environments or the place for installation

9. Beam power switch is set at L, which does not 

9. Set beam power switch at H and make the unit 

keep enough sensitivity allowance

gain-locked with receiver cover detached 

Model

PB-IN-50HF

PB-IN-100HF

PB-IN-200HF

Detection System

Near infrared beam interruption system 
(TR. - RE. 4 beams simultaneous interruption)

Infrared beam

Double modulation pulsed beam by LED

Protection 

Outdoor 165’

Outdoor 330’

Outdoor 660’

distance

(50m) or less

(100m) or less

(200m) or less

Max. arrival 

Tenfold

Tenfold )

Tenfold 

distance

1640’ (500m)

3280’ (1000m) 6560’(2000m)

Summary of Contents for Quad PB-IN-50HF









Reviews: