4.
Attach four U brackets to poles in two pairs, one on top of the other,
facing opposite directions.
(See illustration.)
•
(3) Pole mounting back to back.
Attach U brackets to pole and secure to mounting plate with
screws.
Attach sensor body.
Pull through wire.
Connect terminals.
Attach covers. (Break knockouts on cover and *pole cover to adapt
to pole diameter and configuration.)
•
•
•
•
•
Grommet
The grommet is compatible with a wire of ø3mm to ø6mm
outer dia.
When a wire of more than ø6mm outer dia. is used, cut off
the dotted line portion on the below figure by pliers or the
like.
Do not fail to plug opening of wire hole to prevent insects
from entering into the unit.
•
ø1.50" (ø38mm) inner
ø1.89" (ø45mm) outer
Grommet
U bracket
Knockout
Knockout
Knockout
*SOLD SEPARATELY
