5-12
MAINTENANCE
MAINTENANCE LIST
MAINTENANCE LIST
*: If the percentage of the traveling time within the total operating time is high, replace the gear
oil earlier than the specified time.
Inspection and maintenance item
Page
Walk-around inspection
Inspecting by opening the engine hood and covers
5-14
Inspecting by walking around the machine
5-15
Inspecting while sitting in the operator’s seat
5-15
Daily inspection (every 10 hours)
Inspecting and replenishing the coolant
5-16
Inspecting and replenishing the engine oil
5-17
Inspecting the fuel filter (water separator)
5-18
Inspecting the fuel level
5-18
Inspecting the hydraulic oil tank level and replenishing
5-19
Lubricating the working equipment
5-21
After the initial 50 hours (only for new machines)
Replacing the engine oil and the oil filter
5-22
Inspecting and adjusting the fan belt
5-24
Replacing the hydraulic oil return filter
5-25
Every 50 hours
Inspecting and adjusting the crawler tension
5-26
Lubricating the slew bearing
5-28
Lubricating the slew motor pinion
5-28
Draining the water from the fuel tank
5-29
Inspecting the battery fluid level and replenishing
5-30
Every 100 hours
Cleaning the fuel filter
5-32
After the initial 250 hours (only for new machines)
Replacing the travel motor gear oil*
5-33
Every 250 hours
Replacing the engine oil and the oil filter
5-34
Inspecting and adjusting the fan belt
5-34
Cleaning the air cleaner
5-34
Cleaning the radiator fins
5-36
Summary of Contents for TB210R
