Takeuchi 190100003, Operator'S Manual

Page: 89 / 305

2-37
CONTROLS
SWITCHES
THIRD AUXILIARY HYDRAULIC SWITCH
AND BUTTON (IF EQUIPPED)
Refer to “Third auxiliary hydraulic switch and
button (If equipped)” on page 2-67.
AUXILIARY 2/4 SELECT BUTTON
(IF EQUIPPED)
Refer to “Auxiliary 2/4 select button (If
equipped)” on page 2-68.
OUTRIGGER SWITCHES (IF EQUIPPED)
J .............. Dozer blade operation (both sides)
K ............. Outrigger operation (both sides)
L .............. Left outrigger operation
R ............. Right outrigger operation
The outrigger operation is performed with the
blade /outrigger lever.
RAM LOCK SWITCH
Do not lock the suspension while
traveling. Doing so may create a
dangerous situation. Be sure to lock the
suspension only when working with the
machine.
Lock the suspension of the front axle
(wobbling) with this switch to prevent the
cylinder from moving.
A/C
AUTO
TEMP
OFF
DENSO
...... Locks the suspension of the front
axle.
Push the LOCK side of the switch
to secure the machine when
working.
FREE ....... Unlocks the suspension. Keep the
switch in this neutral position
while traveling (High-speed travel:
Low-speed travel switch is off).
...... The suspension is automatically
locked if the brake is pressed
when traveling at low speed
(low-speed travel: turtle symbol),
and it is unlocked when the brake
is released.
When traveling at high speed
(high-speed travel: low-speed
travel switch is off), the
suspension is not locked even if
the brake is pressed.