Takeuchi 12820004, Operator'S Manual

Page: 98 / 182

96
MAINTENANCE
Service Data
Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the
chart below.
¡
Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡
Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Part
Type
Type by temperature
-22 -4 14 32 50 68 86 104
°
F
-30 -20 -10 0 10 20 30 40
°
C
Replacement
interval
Capacity
R
(US. qt.)
Engine
oil pan
Diesel
engine oil
API-CD
After first 50
hrs.
Every 250 hrs.
Upper limit:
3.9 (4.1)
Lower limit:
2.7 (2.9)
S y s t e m : 7 0
(18.4US.gal.)
T a n k : 4 4
(11.5US.gal.)
Hydraulic
tank
Antiwear
hydraulic oil
Every 2000 hrs.
Use a clean, Quality fuel for good performance and optimum engine life.
¡
To prevent fuel flow problems in cold weather, use diesel fuel with a pour point
of at least -12
°
C (10
°
F) below the lowest expected ambient temperature.
¡
Minimum cetane number is 45. Low temperature or high altitude operation
may require the use of fuel with a higher cetane number.
Fuel tank
Diesel fuel
35
(9.2US.gal.)
Engine
cooling
system Coolant
(water ** +
coolant ***)
30% coolant mixture
50% coolant mixture
Every 1000
hrs.
4.5 (4.8)
SAE 5W-20
SAE 10W-30
SAE 15W-40
ISO VG68
ISO VG46
ISO VG32
Travel
reduction
gear
Gear oil
API-GL-4
SAE 90
After first 100 to
250 hrs.*
Every 1000 hrs.
Slew
bearing
Working
equipment
Levers
Lithium
based
grease
EP-2
NLGI No. 2 Every 50 hrs.
Daily or every
10 hrs.
When required
As
required
0.5 (0.53)
* If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** For water, use tap water (soft). Do not use well or river water.
*** When the ambient temperature drops below 0
°
C, add coolant (antifreeze). Follow the
coolant manufacturer’s instructions to determine the mixture ratio.