Takeuchi 12820004, Operator'S Manual

Page: 26 / 182

24
SAFETY
Transporting Precautions
Load and unload the machine safely
The machine may roll or tip over or fall while
loading or unloading it. Take the following
precautions:
¡
Select a firm, level surface and keep
sufficient distance from road shoulders.
¡
Use loading ramps of adequate strength
and size. Maintain the slope of loading
ramps within 15 degrees.
¡
Secure the ramps to the truck bed.
¡
Keep the truck bed and loading ramps
clean of oil, clay, ice, snow, and other
materials which can become slippery.
Clean the tracks.
¡
Block the transport vehicle so it can not
move.
¡
Use a signal person when loading and
unloading the machine, and travel slowly
in first gear (low speed).
¡
Never change course on the ramp.
¡
Do not slew (swing) on ramps. The
machine may tip over.
¡
When slewing (swinging) on the truck bed,
do so slowly as the footing can be
unstable.
¡
Engage the slew (swing) lock after loading.
¡
Block both tracks and secure the machine
to the truck bed with load binders.
Transport the machine safely
¡
Know and follow the safety rules, vehicle
code and traffic laws when transporting
the machine.
¡
Consider the length, width, height and
weight of the truck with the machine
loaded on it when determining the best
route.
E4F001
Fasten to the suspension fitting
Ramp
15
°
or less
Distance between ramps
Stopper