background image

Version 3

2022.09

Contents

Before installation
Usage conditions
Content of packaging
Carrying the main body

After installation
Dimensions
Unit fixing position and plumbing layout
MEMO

2
3
4
5

15
16
17
18

1.Installation of Basin Unit
2.Piping
3.Installing the Footrest
4.Attaching the Seat Part
5.Procedure for swapping the reclining 

   pedal from left to right.
6.Attaching the External Covers

7
8

10
12
13

14

To the installer

• The instructions should be thoroughly read 

and understood before installation to ensure 

that YUME NAGOMI is installed correctly.
After installation, give these instructions to the customer.

To the customers

• Customers must ask professional to install YUME NAGOMI.
• Customers must not install YUME NAGOMI by themselves.
• Customers must store these instructions in a safe place so 

as not to lose them.

* The actual shape of YUME NAGOMI and the images and 

dimensions listed in these instructions may be modified 
and are subject to change without notice.

Caution

• The precautions listed here are to ensure that YUME NAGOMI can be installed safely, and to prevent any danger or risk to the person installing 

YUME NAGOMI or those around them.All of these precautions are important for safety. Takara Belmont is not responsible for any damage or risk 
to the person installing YUME NAGOMI or those around them due to accidents if YUME NAGOMI is installed without adhering to the precautions.

If YUME NAGOMI is installed after ignoring this symbol, 

"there is the risk of light or moderate injury or physical damage".

Note : Plumbing should be performed by a qualified technician and should meet all national and local plumbing codes and ordinances. 

It is the responsibility of purchaser and/or plumber to conform to national and local codes and ordinances.  

Takara Belmont does not take any responsibility or liability for plumbing and installation.

"YUME NAGOMI"  Installation Instruction

1

YUME N AGOMI

Image is of
  AY-YMIXIHGL*

(                   )

AY-YMIXIL

 

GL1

AY-YMIXIHGL1

YUME NAGOMI/Ltype/GL1(WHITE)
YUME NAGOMI/Ltype/GL2(BLACK)
YUME NAGOMI/Ltype/GL3(DARK BRAWN)
YUME NAGOMI/Ltype/GL4(MAROON)
YUME NAGOMI/Htype/GL1(BLACK)
YUME NAGOMI/Htype/GL2(DARK BRAWN)
YUME NAGOMI/Htype/GL3(WHITE)
YUME NAGOMI/Htype/GL4(MAROON

)

GL2
GL3
GL4

GL2
GL3
GL4

Summary of Contents for YUME NAGOMI





















Reviews: