background image

Precautions when raising or lowering the chair

Safety Precautions (Must be Obeyed)

WARNING

Be sure to always perform daily inspection

Do not let children fix or clean the chair

Do not let children play with the chair

Only persons who are certified hairdressers or beauticians can be allowed to use this chair

This product is designed for commercial use in barber shops and beauty salons. 

Only persons who are certified hairdressers or beauticians can be allowed to use this chair.

Precautions when using the table

Turn off the power switch and unplug the power plug before cleaning

Doing so can result in electric shock or fire. Also, sudden movement of the chair while cleaning can result in injury.

4

Precautions when using the heater

Precautions for the service outlets

Before raising or lowering the chair, always be sure to check that there are no persons or objects near the chair or step, 

under the armrest or in the gap of the support arm and so on. There is a danger of body parts being pinched, resulting 

in injury or damage.

• The heater light is lit up in red when the heater is operating. Using the heater for an extended period causes the 

temperature to increase, possibly resulting in burns or fire. Be sure to turn off the heater switch when not necessary.

• Turn off the power and remove the power plug if you feel abnormal heat when touching the legrest, and contact your 

closest dealer or Takara Belmont.

• 

Be sure to fully insert the power plug of the device being used into the outlet until reaching the base of the plug. Failure 

to fully insert the plug or similar loose connection can result in a short circuit or heat generation that causes a fire.

• If the connection becomes loose, immediately stop using the device plugged into the service outlet, turn off the device 

power switch, and remove the power plug from the outlet. Also, stop using the chair, turn off the power, unplug the 

power plug, and contact your closest dealer or Takara Belmont.

• Remove the power plug of a device from the outlet when not using it.

• If any water gets on a service outlet, immediately turn off the chair power switch, remove the plug, and wipe away the 

water. Additionally, if a substantial amount of water gets inside a service outlet, immediately remove the plug and 

contact your closest dealer or Takara Belmont.   

• Do not touch a service outlet with a wet hand.

Check that the table is securely inserted into the table securing slot before using the table. Failure to fully insert the 

table can result in the table falling off, causing injury and damage.

Do not let children play with the chair or stand on the backrest, armrests or other parts of the chair. Doing so can result 

in an accident or injury.

Do not let a person unfamiliar with handling the chair (lack of experience and skills) such as children fix or clean the 

chair. Doing so can result in an accident or injury.

Perform daily inspection according to the "Daily Inspection Procedures". Using the chair without performing daily 

inspection can result in malfunction or accident.

Summary of Contents for Luxury MAXIM AB-9500P

































Reviews: