background image

How to Use

19

Setting the front shampooing position

Setting the seat position for children

Setting the relaxation seat position

Returning the seat to its initial (neutral) position

Initial (neutral) position

Front shampooing position

Seat position for children

Relaxation seat position

Side view of the seat

This chair is equipped with a function that allows you to adjust only the seat section separately.

Use this function to make the necessary adjustments.

P2

HE

ATE

SEAT

P2

SEA

T

Right

Left

P2

HE

ATE

SEAT

P2

SEA

T

Right

Left

(5) Adjusting the Seat

CAUTION

Push the seat operation switch on the control panel upwards. The 

seat continues to rise as long as you hold the switch. The rear part of 

the seat is lifted horizontally, allowing you to set the chair to a position 

suitable for a child during cut and styling. If a child needs to use the 

legrest, you can adjust it by putting it in a horizontal position.

Push the seat operation switch on the control panel upwards. The 

seat continues to rise as long as you hold the switch. The front part of 

the seat tilts forward, allowing you to set the chair to the best position 

to provide treatment during front shampooing.

Push the seat operation switch on the control panel downwards while 

the seat is in its initial (neutral) position. The seat continues to move 

down as long as you hold the switch, allowing you to set the 

relaxation seat position.

While the seat is raised above its initial position, push the seat 

operation switch on the control panel downwards once to lower the 

seat to its initial position automatically. The seat is designed to lower 

slowly in order to ensure safety. Use the "Cancel Function" (p. 18) to 

stop the seat while it is moving.

• Do not raise the seat with the backrest reclined

.

• Do not raise or lower the seat while a child is seated. Only allow a child to sit 

down after setting the chair to an appropriate position.

Summary of Contents for Luxury MAXIM AB-9500P

































Reviews: