Takara Belmont Luxury MAXIM AB-9500P, Operation Manual

Page: 12 / 32

Power plug
C-type plug model
Power cord
Ground
Power Supply
1. Insert the power plug into the outlet
10
BF-type plug model
Power plug
Power cord
Ground
• Be sure to fully insert the power plug
into the outlet until reaching the
base of the plug. Failure to fully
insert the plug or a similar fault can
result in a short circuit or heat
generation that causes a fire .
• Do not pull the cord to remove the
power plug from the outlet. Hold by
the power plug at the end of the
cord when removing. Removing the
plug by pulling the power cord can
damage the power cord, resulting in
electric shock or fire .
• Power cord replacement must be
performed by the dealer, Takara
Belmont staff, or a technician with
equivalent certification .
• Use an unshared outlet* that has an
attached ground terminal and
matches the rated voltage and
current of this product. Using the
same outlet together with the power
plug of other devices can result in
abnormal heat generation and
possible fire .
* 230 V AC (7 A or more )
• Wiring work must be performed by
certified personnel. Consult an
electrician for wiring work .
• Do not connect the earth (ground) to
the following objects .
• Water pipe s
Complete grounding is not
possible as hard plastic pipes are
widely used.
• Gas Pipe s
Connecting to gas pipes can result
in an explosion or fire .
• Lightning rods and telephone
dedicated grounding wire
• Failure to make a ground connection
can result in electric shock if there is
a malfunction or short circuit.
Consult an electrician for grounding
procedures.
Preparation
WARNIN G