background image

How to Use

21

You can use this as a stand for a hand dryer or iron while working.

Pull out the dryer/iron holder from the lower part of the body 

on the right side of the chair.

Dryer slot

Dryer/Iron holder

Iron slots

(8) Using the Dryer/Iron Holder

CAUTION

(7) Using the Service Set (Optional)

Service table

Holder

Armrest decorative end cap

Service table securing slot

Check that the table is securely inserted into the table securing slot before using the table.

Failure to fully insert the table can result in the table falling off, causing injury and damage.

CAUTION

Before starting work, insert the fixture side of the 

service table into the service table securing slot, 

and push it all the way in.

The table is now ready.

• Do not insert/remove the table or operate the cha

ir with items on the table. Doing so can result in 

such items falling off or in spilling of liquids.

• 

Do not place objects that exceed 20 N (2 kgf/4.5 lbf) on the table, or items that hang over or extend 

beyond the table surface. Doing so can result in damage to or deformation of the chair or table.

• Do not use the cape holder when using the table

. Doing so can result in damage to or 

deformation of the cape holder or table.

• Be careful that nearby devices such as the shampoo bowl do not interfere with the table when 

rotating or operating the chair while using the table.

• Be careful that the dryer or iron does not contact the legs o

r other body parts of 

the user or customer when using the dryer/iron holder.

 Always be sure to return the holder to its original position after use so it does 

not interfere with work.

• 

Do not rotate the dryer/iron holder with an iron or hand dryer still inserted in the slot.

• Doing so can damage the body

 of the chair, and the heat can cause 

deformation or other damage.

 The dryer/iron holder can withstand a load of up to 50 N (5 kgf/11.2 lbf).

Summary of Contents for Luxury MAXIM AB-9500P

































Reviews: