Takara Belmont LUAR AB-MF, Operation Manual

Page: 7 / 32

5

Lower the chair to the lowest
position when the customer is
leaning forward for washing.
The chair can tip over if the customer
places his/her foot on the step with the
chair not completely lowered, resulting in
injury or damage.

Before operation, check that
all parts operate safely with no
faults or other problems.

Be careful when operating the
headrest that fingers and
other body parts are not
pinched between the area
around the operating lever or
in between the backrest.

Do not allow persons
weighing 135 kg or more to sit
on the chair.
Doing so can cause the chair to tip over
or faulty operation.

Do not climb on the chair.
Do not stand on the seat, backrest,
armrests or other parts of the chair.
Doing so can result in damage to the
chair or injury.

Do not wipe down with
chemicals or apply heat.
Immediately wipe off any chemicals
adhering to the leather or pump cover.
Doing so can result in deformation or
discoloration.

Do not place any objects other
than persons in the seat.
Do not place any objects other than
persons in the seat. Doing so can result in
deformation or tearing of the leather, or
corrosion.

Recline the chair at the end of the day.
After the work of the day, lower the chair to the lowest position and completely recline the
backrest. This helps to extend the service life of the chair by not applying a load to springs and
cylinders.
NOTE
Contact Takara Belmont or its
distributors if the breaker (power
switch) frequently operates. The maximum load is 1,350 N (135 kgf).
The raising speed declines when the
load is nearly the maximum.
Safety Precautions (Must be Obeyed)
Use Precautions
CAUTION

Always operate the power
switch by using your hand.

Be careful that the power cord
is not caught up by your feet
or legs.

Do not place objects on top of
the power cord.
Do not place objects on top of the power
cord. Damage to the power cord can
cause a severed wire or short circuit,
resulting in electric shock or fire.