21
Lock the chair at the Yume Swing setting position so that the Yume Swing
position setting and the bowl are aligned at the proper position, and check that
the chair and bowl are properly aligned
.
Reposition the Yume Swing setting position to the proper position after moving the
chair for cleaning or similar reason because the position might become misaligned
due to such movement.
The Yume Swing position setting has a simple lock for position detection. Always
be sure to fully lock it by using the rotation lock switch after aligning the position
because the lock can be released with only slight force.
(8) Yume Swing Bowl Positioning (OS Type)
This chair is equipped with a "Yume Swing Position Setting"
in the chair base that detects position in order to be able to
properly align the positions of the Yume Swing bowl and
chair rotation.
1 Release the rotation lock and rotate the chair.
2 Rotation becomes slightly heavy as you slowly rotate the
chair until it is near the Yume Swing bowl position and
you feel a slapping click
.
3 After the chair secured at the position in 2, you can press a
previously set preset switch to align the chair and Yume
Swing bowl at the proper position.
Yume Swing Position
The Yume Swing position consists of the two positions shown below. Use these in alignment with the bowl
position.
Front
Power cord side
Front
Power cord side
Front Position
Rear Position
Use Procedures
Slap
CAUTION
Summary of Contents for LUAR AB-MF
Page 2: ......
