19
After installing the step, check that the step fixture is securely held by the guide, the
nuts are inserted in the insertion holes, and the step is not loose. Be careful that
there is no looseness as this could result in instability when the customer is getting in
and out of the chair.
Be careful when lifting and carrying the step, and of where you place it because the
step is heavy. Dropping the step could result in serious injury.
Be careful of operating the chair when using a foot bath and make sure that the chair
does not interfere with the foot bath.
Immediately wipe off any water, cosmetic agent or other liquid of the foot bath if it
gets on the chair. Not wiping it off can result in rust or other damage.
Precautions when extending the adjuster
Adjust the adjuster so that the power cord is not caught or pulled, and the chair does not
rub on the floor when rotating the chair with someone seated in it.
Failure to follow this caution can result in an unexpected accident or damage to the floor.
(5)
Removable Step
You can remove the step anytime it might interfere such as when sitting a wheelchair customer in the
chair or using a foot spa machine. If using the independent legrest type (AB-MFBSB), raise the legrest
and make the guide visible before performing work.
(Legrest-step linked type)
(Independent legrest type)
1
Step Removal
Remove the step fixture held by the guide and remove the step.
2 Step Installation
Holding the step fixture against the positioning stoppers, attach the step fixture to the guide, and
securely insert the nuts on the underside of the step into the two (three for independent legrest
type) insertion holes.
Legrest
Guide
Nuts
Step fixture
Step (underside)
Loosen
Extend
Positioning
stoppers
Insertion holes
Legrest
Guide
Nuts
Step (underside)
Retract
Tighten
Extend
Positioning
stoppers
Insertion
holes
Adjuster
Adjuster is on
underside.
Loosen
Step
fixture
Use Procedures
Retract
WARNING
CAUTION
Tighten
Adjuster is on underside.
Summary of Contents for LUAR AB-MF
Page 2: ......
