B
Fixing the upper main unit onto the stand.
Upper main unit
M5 x 15 cap bolt (with spring washer): 2 pieces
Insert the upper main unit into the stand pole,
and tighten it at two points with the supplied screws.
*Use the supplied L‑shaped wrench.
*Do not hold the unit at the ring when performing this procedure.
@
Assembling the stand.
AInstalling the stand base cover.
Stand base
Stand pole assembly
Stand base cover
M5 x 15 cap bolt : 4 pieces
(With a spring washer)
Latch of the stand base cover (8 latches)
Insert the stand pole into the stand base and tighten
at four points with the supplied screws.
* Use the supplied L‑shaped wrench.
Fix the stand base cover through the
stand pole.
*Install the stand base cover so that the latches
on the backside will hook onto the stand base.
2
*Tighten the stand pole firmly to prevent the unit from rattling.
*Tighten the screws firmly to prevent the unit from rattling.
