G
Installing the pipe cover.
H
Attaching the power cord.
I Completion.
Fit the latch into the pitted
area on the cover.
A
space is created at the rear end of the
pipe cover.
A gap can be seen between the
pipe cover and the main unit cover.
Correctly Installed Pipe Cover
M3 x 15 pan‑head screw
(with flat washer, spring washer): 1 piece
Fit in the pipe cover.
Above illustration shows a shaft inclined forward.
Above illustration shows a shaft inclined backward
Information
*Insert the latch provided at the
back of the pipe cover into the
pitted area on the main unit cover.
*Be sure to check the operation.
Fix the cord at the power cord stopper at one
point with the supplied screw.
*Use the Phillips‑head screwdriver.
If the shaft is fixed in an inclined position at
process step , the pipe cover may not
install correctly . If this is the case, adjust the
fixing position of the shaft.
【
Specification w/o Fan
】
6
