19
6.2. LOG FEEDING
Before operation place the in-feed conveyor in a horizontal operating position:
• Pull out the safety pin;
• Lower the in-feed conveyor to the horizontal position and support it using the supporting leg;
• Set the supporting leg so that the upper
rod on the conveyor belt in the middle of
the in-feed conveyor is slightly elevated
above the table (factory default setting).
Activate the feeding by pushing the control handle to the right. The feeding can be stopped at any
time (when the log reaches the cutting length limiter) by pushing the handle to home (neutral)
position. To activate the feeding in the opposite direction push the control handle to the left.
Safety pin
Conveyor TT 510 S, TT 404 R, TT 504 R
Conveyor TT 404 and TT 504
• Remove the support limiter;
Attention! If the feeding is active after the log reaches the cutting length
limiter, the in-feed conveyor belt can slip and can become damaged!
Valve
Summary of Contents for RCA 480 JOY
Page 39: ...8 2 LOADING WITH THE HELP OF LIFTING STRAPS 39 TRANSVERSELY L 3 m ...
Page 43: ...43 ...
Page 44: ...44 ...