taiyo RX-802AS, Operation Manual

Page: 6 / 32

TAIYO ELECTRIC IND.CO.,LTD.
6
TAIYO ELECTRIC IND.CO.,LTD.
KEY
LOCK
RX-802
HEAT
SLEEP
TEMP. ˚C
AS
①
⑤
⑥
③
②
④
⑦ ⑧ ⑨
1. HEAT lamp
Lights up when the heater is ON.
2. SLEEP lamp
Flashes while setting the SLEEP function. The flashing of the sleep lamp
will increase 30seconds before entering SLEEP mode.
Lights up when the unit enters SLEEP mode.
3. TEMP. display
When the power is turned ON or when SLEEP mode is exited, the TEMP
display shows the tip temperature rise to the set temperature. The TEMP
display shows the set temperature when it is reached.
4. ALARM lamp (to the right of the last digit in the temperature display)
Lights up when the tip temperature is within the DIF range.
Turns off when the tip temperature is out of the DIF range.
Flashes when the tip temperature is out of the upper and lower
temperature limits.
5. KEY LOCK lamp
Flashes while setting the Key Lock function.
Lights up when the unit is in Key Lock mode.
6. KEY LOCK key
Use to set the Key Lock function.
Use to lock and unlock the keypad.
7. SETTING key
This key is pressed when starting and completing the temperature
setting process. It is also used during the parameter changing procedure
to move to the next parameter and to complete the parameter setting
process by pressing continuously for 3 seconds.
8. DOWN key
This key is used to reduce the used to reduce the temperature and
change the parameter.
9. UP key
This key is used to increase the temperature and change the parameter.
■
Operation Panel