26
TAIYO ELECTRIC IND.CO.,LTD.
26
5
Maintenance
CAUTION
The soldering unit is designed so the tip
can be replaced without turning OFF the
power. However, the tip is very hot. Do not
touch the tip or serious burns may result.
The removed tip should be placed in the
hole in the iron stand tip end first and kept
in there until it cools down.
Slide Lever
1. Slide the lever on the soldering unit in
the direction of the arrow.
2. Hold the part marked A and pull the
tip out in the direction of the arrow.
The electricity to the soldering unit
automatically goes off as soon as the
lever is slid forward to remove the tip.
3. Plug the new tip into the end of the
soldering unit making sure that the cut
part of the tip is aligned with the cut
part of the soldering unit. Push the tip
into the handpiece as far as it will go.
The tip will not heat up until any key on
the control unit keypad is pressed.
5-1 How to Change the Tip
NOTE )
When changing to a different type of tip, be sure to input the Tip No. (Refer to
page 11
)
Since the heater is integrated into the tip, replacement of only the heater or the tip is not possible.
Slide Lever
A
KEY
LOCK
RX-802
HEAT
SLEEP
TEMP.
˚C
AS
Press any button.
4. Press any key on the keypad to start
the flow of electricity to the heater.
TAIYO ELECTRIC IND.CO.,LTD.
Summary of Contents for RX-802AS
Page 25: ...TAIYO ELECTRIC IND CO LTD 25 ...
