T2200P Weighing Indicator User’s Guide
- 8 -
operate.
To disable the Check-Weighing function enter zero into both limits by pressing the
FUNC
key when the current limits are shown then pressing
ZERO
to store the zero
values.
6.6 Accumulated Total
The scale can be set to accumulate manually by pressing the
key. See the
PARAMETERS Section for details of selecting the method using function "
F5 PRT
".
The accumulation function is only available when weighing. It is disabled during
parts counting.
.
The weight displayed will be stored in memory when the
key is pressed and
the weight is stable.
The display will show "
ACC 1
" and then the total in memory for 2 seconds before
returning to normal. If the optional RS-232 interface is installed the weight will be
output to a printer or PC.
Remove the weight, allowing the scale to return to zero and put a second weight on.
Press the
key, the display will show "
ACC 2
" and then the new total.
Continue until all weights have been added.
To view the totals in memory press
key in zero point (ZERO indicator on), to
clear the memory, just press
FUNC
key during memory recall display.
When the scales are set to display in other units of weight the accumulation function
is still keeping the weight in kilograms.
Summary of Contents for T2200P series
Page 1: ...T2200P series Weighing Indicator User s guide UGT2200P E1 00 ...
Page 2: ......
Page 4: ......