Tait TP9600 User Manual Download Page 44

Page: 44 / 110

If no address book is configured, a preconfigured list appears. The person to whom the last individual
call was made is highlighted.

2. Scroll to the desired person to call and press the PTT key to make the call immediately.

Alternatively, press

Call

and then PTT.

If an address book is configured, it's possible to either dial a number or show the address book.

Making a Local Call

For analog channels, each channel on the radio may have one or more local calls programmed. For digital radio-to-
radio calls, see

Making an Individual Call

Using the Main menu

1. Select the required channel.

2. Press

Menu

and select

Local calls

3. In the

Local calls

menu, scroll through the list of local calls until the desired call appears.

4. Press

Send

The call details appear on the display, the LED glows red, and the transmit,

, or low power trans-

mit,

, icon appears on the display.

Using the Quick Access menu

1. Select the required channel.

2. Press one of the scroll keys or the left selection key to open the

Local calls

menu.

Tait International Ltd July 2021

Summary of Contents for TP9600















































































































Search results

Summary of Contents for TP9600

Reviews:

Related manuals for TP9600

Brands by name

Popular brands

Tait TP9600, User Manual

Search results

Summary of Contents for TP9600

Reviews:

Related manuals for TP9600

Brands by name

Popular brands