Tait TP3300 User Manual Download Page 19 | Manualshive

Page: 19 / 73

background image

18 For your safety

Suomi (fi): Laite on liitettävä
suojamaadoituskoskettimilla varustettuun
pistorasiaan.

Svenska (sv): Apparaten skall anslutas till jordat uttag.

Electromagnetic compatibility in
European vehicles

In the European Community, radio equipment fitted to
automotive vehicles is regulated by Directive 72/245/
EEC and its amendments. The requirements of this
directive cover the electromagnetic compatibility of
electrical or electronic equipment fitted to automotive
vehicles.

Unapproved modifications or changes
to radio

The radio is designed to satisfy the applicable
compliance regulations. Do not make modifications or
changes to the radio that are not expressly approved
by Tait. Failure to do so could invalidate compliance
requirements and void the user’s authority to operate
the radio.

Attaching of labels

Warning

Do not obstruct the vent hole on the battery

or the vent hole on the radio chassis label. If the vent
on the battery is obstructed, the battery may explode,
causing personal injury and/or damage to property. If
the vent on the radio is obstructed, audio quality and/
or key function may deteriorate and radio seals may
be damaged.

Caution

Tait recommends that you do not affix

additional labels to the surfaces between the radio
chassis and the battery. The fit between these
surfaces is intentionally firm and any added thickness
will damage the points of attachment between radio
and battery. Do not obstruct the vent holes (see

«
...
17
18
19
20
21
...
»

Summary of Contents for TP3300










































































Reviews:

No comments

Related manuals for TP3300

Brand: Hama Pages: 120

Brand: MaxComm Pages: 24

Brand: Radio Shack Pages: 12

Brand: Sunwave Pages: 47

Brand: Uniden Pages: 24

22 Ch GMRS/FRS Two way radio

Brand: Radio Shack Pages: 44

Brand: RTS Pages: 40

Brand: GME Pages: 33

Brand: Denver Pages: 22

Brand: Realtree Pages: 31

Weatheradio Timekube

Brand: Realistic Pages: 9

Brand: Ericsson GE Pages: 24

Brand: Ericsson Pages: 23

Brand: Clint Pages: 7

Brand: Clint Pages: 48

Busch-AudioWorld 8216 U Busch-Radio iNet

Brand: Busch-Jaeger Pages: 71

Brand: auna Pages: 53

Brand: Lowrance Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands