Tait TP3300 User Manual Download Page 43

Page: 43 / 73

Operation 42

Adjusting the speaker volume

Rotate the power/volume control clockwise to
increase the speaker volume and counterclockwise to
decrease the volume.

The volume control also changes the volume
level of the radio’s audible indicators.

Connecting to a Bluetooth

device (TP3350 only)

You may be able to connect a Bluetooth device to
your radio.

Compatibility with Tait radios

Bluetooth devices may operate with Tait radios,
provided they:

■

are compatible with the Bluetooth Specification
Version 2.0 or higher. Tait recommends Bluetooth
Specification Version 2.1 or higher.

■

include Bluetooth Headset Profile (HSP) adopted
version 1.1 or 1.2, or Bluetooth Handsfree Profile
(HFP) version 1.5 or 1.6.

Wearing a Bluetooth headset

Place the headset on your ear. Depending on which
ear you are going to wear the headset, simply adjust
the ear hook accordingly.

To get the best performance from your headset:

Do not block the device’s internal antenna (see the
device’s user documentation). The human body
can interfere with a Bluetooth signal.

If you usually use your radio with your right hand,
wear the headset on your right ear.

Summary of Contents for TP3300










































































Search results

Summary of Contents for TP3300

Reviews:

Related manuals for TP3300

Brands by name

Popular brands

Tait TP3300, User Manual

Search results

Summary of Contents for TP3300

Reviews:

Related manuals for TP3300

Brands by name

Popular brands