Tait TB7100, Installation And Operation Manual

Page: 90 / 142

90 Preparation for Operation TB7100 Installation and Operation Manual
© Tait Electronics Limited December 2005
Note
By default the audio frequency response will be flat.
7.4.4 Applying Power
Before turning on the base station, check that:
■
all looms and cables at the front and rear of the base station are fitted
correctly
■
all connectors are secure
■
the 20 A fuse is fitted.
Turn on the power supply and check that the base station powers up
correctly:
■
The power LED on the user interface lights up.
■
The LCD indicates the current channel number.
7.4.5 Programming
No changes to the values programmed for line-controlled base operation are
required. See
“Programming” on page 82 for details.
Note
If a soft tail setting is required see later in this chapter “Soft Off
(Tx Tail Time)” on page 118 .
Figure 7.4 System interface link positions
J400 J500 J502 J503 J501