Taie FY400, Operation Manual

Page: 46 / 89

45 FY operation manual
Notes
1. ANL2 & ANH2 is the current signal calibration parameters. It has been calibrated before leaving the factory.
do not change these two parameters value.
2. The user only needs to set HBAC & HBOP, the rest of the parameters will be set & calibrated at the factory.
3. CT has two specifications: SC 80-T & SC 100-T. Please check heater wire diameter and specify required CT.
CT Specifications
Item Specifications
Model number SC 80-T SC 100-T
Max. continuous current 80A 100A
Accuracy 3% 5%
Aperture 5.9mm 12.6mm
Dieiectric Withstanding Voltage(Hi-pot) 2500Vrms / 1 minute 4000Vrms / 1 minute
Vibration resistance 50 HZ, 98 m/s
2
Weight Approx. 12 g Approx. 30 g
Dimensions (UNIT
：
mm)
SC 80-T
SC 100-T