Taie FY400, Operation Manual

Page: 40 / 89

39 FY operation manual
10.14 Fast Level Parameter
Parameter Symbol Content
Range
Default
Hide/
Display
MAX MIN
RH.TC
Dehumidification temperature
If PV less than RHTC manipulated value =
RHPO
(Please refer to Chapter 11.5)
200.0 0.0 125.0 ---
RH.PO
Dehumidification manipulated value
0 : OFF disable dehumidification function
Other values : 0.1~100.0 manipulated value
(Please refer to Chapter 11.5)
100.0 OFF OFF ---
RH.TM
Dehumidification time
time format : min.sec
99.59 0.00 15.00 ---
OPFT
Output filter
unit: second
10.00 0.10 2.00 ---
PV2 Use for motor valve feedback value 100.0 0.0 ---
OUTY=2
&
SET7.1
MOLH
High limit setting of manipulated
value for main output
100.0 0.0 100.0 ---
MOLL
low limit setting of manipulated value for
main output
100.0 0.0 0.0 ---
PSL
Protocol selection
0 : TAIE
1 : RTU
(Please refer to communication manual)
RTU TAIE RTU SET5.4
BITS
Data format
0 : O_81
(parity bit=odd, stop bit=1)
1 : O_82
(parity bit=odd, stop bit=2)
2 : E_81
(parity bit=even, stop bit=1)
3 : E_82
(parity bit=even, stop bit=2)
4 : N_81
(parity bit=none, stop bit=1)
5 : N_82
(parity bit=none, stop bit=2)
N_82 O_81 O_81 SET5.4
IDNO Controller station 254 0 1 SET5.4
BAUD
Baud rate
0 : 24(2400)
1 : 48(4800)
2 : 96(9600)
3 : 192(19200)
4 : 384(38400)
5 : 576(57600)
6 : 1152(115200) bps
1152 24 384 SET5.4
W_MD
EEPROM protection
0 : OFF communication write
command only write to CPU
RAM
1 : ON communication write
command write to CPU RAM and
EEPROM
ON OFF ON SET5.4
MLNB
Piece linear compensation segment select
TRIP : leave setting loop
1~10 : segment select
10 TRIP TRIP SET8.4
COMP Piece linear compare value USPL LSPL LSPL SET8.4
OFFS Piece linear offset value 150.0 -150.0 0.0 SET8.4
HBOP Output percentage of trigger HBA 100.0 0.0 90.0
INP2=4
&
ALD1=9
TRCL Main input TC/RTD zero calibration 9999 0 0 SET2.2
TRCH
Main input TC/RTD span calibration
(hex display)
7FFF 0 5FFF SET2.2
TP_K reserve 100.0 10.0 15.0
PROG
= ON
PVOH
PV bias(for span)
PV = PV x (PVOH / 5000) + PVOS
9999 0 5000 SET6.2